White's World

FERRIS TWIN WHEEL KIT FOR ROTARY FLAIL MOWERS

FERRIS TWIN WHEEL KIT FOR ROTARY FLAIL MOWERS

by T H WHITE on June 30, 2020

NEW FOR 2020!

Ferris Twin Wheel Kit for Rotary & Flail Mowers: 36” 48” 52”

GREAT PRICE AND EASY FITTING

£649 ex-VAT

Part Number: M1-DUALWHEELKIT

Now in Stock • Easy to Install

 

 

 


Instructions for Installation

• Place machine on flat level ground
• Jack up near rear of machine and place axle stand under the rear wheel
• Remove wheel
X

• Use a G clamp and socket to remove old studs from hub
DO NOT USE A HAMMER TO REMOVE STUDS
• Discard old studs and do not reuse
X
X

• Place new ½” UNF x 55mm studs into hub
• Put the black spacer onto hub
• Use the wheel nut and socket to pull the stud into the hub
DO NOT FIT STUDS WITH A HAMMER
X
X

• Do not fit stud into this end of the spacer tube
X
X
X
X

• Put the M11 x 45mm studs into the black spacer
• Use the M11 Wheel nut and socket to pull the stud into the spacer tube
X
X
X

• Fit the inner wheel onto the machine
• Place the spacer tube onto the inner wheel
• Place the wheel nut on with the flat face on the spacer tube
• Tighten wheel nuts to 55Lb/ft
X
X
X

• Place the outer wheel onto the spacer tube
• Fit M11 wheel nuts and tighten to 45Lb/ft
X
X
X
X
X
X

• Ensure the outer wheel is not touching the inner wheel
• If needed you can remove the outer wheel
• Fit the spacer provided to the end of the spacer tube and refit wheel
• Tighten wheel nuts to 45Lb/ft
ALL WHEELS NUTS SHOULD BE RE-TORQUED AFTER 8 HOURS OF USE
T H WHITEFERRIS TWIN WHEEL KIT FOR ROTARY FLAIL MOWERS